To Next Page

To Previous Page

Output command

[SOURce:]VOLTage:LIMit:STATe

This command sets the source OVP state. Parameters include 1, 0, ON and

OFF, Parameters include 0|1|ON|OFF.

Command syntax

[SOURce:]VOLTage:LIMit:STATe <bool>

Arguments

0|1|ON|OFF

Example

VOLT:LIM:STAT 1

Query syntax

[SOURce:]VOLTage:LIMit:STATe?

Returns

0|1

[SOURce:]VOLTage:LIMit

This command sets the upper limit of source voltage.

Model

The setting range of source voltage upper limit

IT6411

0~ 15.1V

IT6411S

0 ~ 15.1V

IT6431

0 ~ 15.1V

IT6432

0 ~ 30.1V

IT6433

0 ~ 60.1V

IT6432S

0 ~ 30.1V

Command syntax

VOLTage:LIMit < NRf >

Arguments

< NRf >

Unit

V(Volts)

ITech IT6400 Series Programming Guide

Other manuals for ITech IT6400 Series