ITech IT6400 Series - Battery:capacity:clear; Battery:save; Battery:clear

Battery commands
Copyright © Itech Electronic Co., Ltd. 106
Arguments
NONE
Example
BATT:STOP
BATT2:STOP
BATTery:CAPacity:CLEar
This command sets to clear the current capacity of the BATTERY.
Command syntax
BATTery:CAPacity:CLEar
Arguments
NONE
Example
BATT:CAP:CLE
BATTery:SAVE
This command sets to save the current group of the BATTERY to FLASH.
Command syntax
BATTery:SAVE
Arguments
NONE
Example
BATT:SAVE
BATTery:CLEar
This command sets to clear the BATTERY group value as 0, and save to
FLASH.
Command syntax
BATTery:CLEar