ITech IT6400 Series Programming Guide

System commands
Copyright © Itech Electronic Co., Ltd. 30
SYSTem:TIME
This command is used to set the system time.
Command syntax
SYSTem:TIME<NR1>,<NR1>,<NR1>
Arguments
<NR1>,<NR1>,<NR1>
Example
SYSTem:TIME 8,45,22
Query syntax
SYSTem:TIME?
Returns
<NR1>
SYSTem:COMMunicate:SELect
This command is used to select the communication interface.
Arguments
USB|GPIB |LAN
Example
SYST:COMM:SEL USB
Query syntax
SYSTem:COMMunicate:SELect?
Returns
USB|GPIB |LAN
SYSTem:COMMunicate:PROTocol?
This command queries system communication protocol.
Command syntax
SYSTem:COMMunicate:PROTocol?

ITech IT6400 Series Specifications

General

Brand	ITech
Model	IT6400 Series
Category	Power Supply
Language	English