ITech IT6400 Series Programming Guide

Status commands
Copyright © Itech Electronic Co., Ltd. 25
Related Command
STAT:QUES:COND?
STATus:PRESet
When this command is sent, the SCPI event registers are affected as follows:
All bits of the following registers are cleared to zero (0):
 Questionable Event Enable Register.
 Channel summary Event Enable Register.
 Operation Event Enable Register
NOTE Registers not included in the above list are not affected by this
command.
Command syntax
STATus:PRESet
Arguments
None
Example
STAT:PRES

ITech IT6400 Series Specifications

General

Brand	ITech
Model	IT6400 Series
Category	Power Supply
Language	English