ITech IT6400 Series Programming Guide

Trace Commands
Copyright © Itech Electronic Co., Ltd. 86
Command syntax
TRACe:POINts:ACTual?
Arguments
None
Example
TRACe:POINts:ACTual?
Returns
<NR1>
TRACe:POINt
This command sets the data cache depth.
Command syntax
TRACe:POINt <NR1>
Arguments
1-1024
Example
TRACe:POINt 600
Query syntax
TRACe:POINt?
Returns
<NR1>
TRACe:FEED
This command is used to select the reading source saved in the cache. If
VOLTage is selected, the voltage reading is saved in cache; if CURRent is
selected, the current reading is saved in cache. If VOLTage and CURRent are
simultaneously selected, both voltage and current are saved in cache when
saving is executed.
Command syntax
TRACe:FEED <CRD>

ITech IT6400 Series Specifications

General

Brand	ITech
Model	IT6400 Series
Category	Power Supply
Language	English