ITech IT6400 Series - Status:questionable:ntransition; Status:questionable:condition

Status commands
Copyright © Itech Electronic Co., Ltd. 22
Related Command
STAT:QUES?
STATus:QUEStionable:NTRansition
This command sets or reads the negative value of the questionable condition
register. When the bit value of the questionable condition register changes from
1 to 0, and the corresponding bit of ntransition regiser is 1, then the
corresponding bit value of questionable event register turns into 1.
Command syntax
STATus:QUEStionable:NTRansition <NR1>
Arguments
0 to 65535
Default Value
0
Example
STAT:QUES:NTRansition 32 STAT:QUES:NTRansition 1
Query syntax
STATus:QUEStionable:NTRansition?
Returns
<NR1> (register value)
Related Command
STAT:QUES?
STATus:QUEStionable:CONDition?
This query returns the value of the Questionable Condition register. That is a
read-only register that holds the real-time (unlatched) questionable status of the
power supply. This command is not channel specific, it applies to the entire
mainframe.
Query syntax
STATus:QUEStionable:CONDition?