3.2.2 Change Observation Range [RANGE＋/－] ......................................................3-6
3.2.3 Tune...................................................................................................................3-7
3.2.4 Adjust Gain [GAIN].............................................................................................3-8
3.2.5 Suppress Sea Clutter [SEA] ..............................................................................3-9
3.2.6 Suppress Rain/Snow Clutter [RAIN] ................................................................ 3-11
3.2.7 Reset Alarm Buzzer [ALARM ACK]..................................................................3-12
3.2.8 Adjust to the Best Image..................................................................................3-13
3.3 OPERATION PROCEDURES ............................................................ 3-14
3.3.1 Move Cross Cursor Mark by Trackball.............................................................3-14
3.3.2 Operate Software Buttons ...............................................................................3-14
3.3.3 Operation of Combobox...................................................................................3-15
3.3.4 Operation of Checkbox ....................................................................................3-15
3.3.5 Basic Menu Operation .....................................................................................3-16
3.3.6 Operation on Numeric Value, Latitude / Longitude and Character Input menu 3-18
3.3.7 Overview of Menu Structure ............................................................................3-23
3.4 GENERAL RADAR OPERATIONS.................................................... 3-24
3.4.1 Interference Rejection (IR)...............................................................................3-24
3.4.2 Switch Transmitter Pulse Length [GAIN]..........................................................3-25
3.4.3 Target Enhance (ENH).....................................................................................3-25
3.4.4 Use Video Processing (PROC)........................................................................3-26
3.4.5 Switch Azimuth Display Mode (AZI Mode).......................................................3-27
3.4.6 Switch True/Relative Motion Display Mode (TM/RM).......................................3-28
3.4.7 Move Own Ship’s Display Position (Off Center)...............................................3-29
3.4.8 Display Radar Trails (Trails).............................................................................3-30
3.4.9 Zoom (x2) ........................................................................................................3-33
3.4.10 Hide/Display Range Rings (HL Off) ...............................................................3-33
3.4.11 Hide Graphics Information on Radar Display (Data Off) ................................3-34
3.4.12 Switch Day/Night Mode [DAY/NIGHT] ...........................................................3-34
3.4.13 Adjust Operation Panel Brilliance [PANEL] ....................................................3-34
3.4.14 Set True Bearing............................................................................................3-35
3.4.15 Set Own Ship Speed......................................................................................3-35
3.4.15.1 Switch Own Ship Speed Device ..............................................................3-35
3.4.15.2 Input the own ship speed (Manual Speed) ..............................................3-36
3.4.16 Set Drift Correction ........................................................................................3-37
3.5 USE OWN SHIP’S TRACK DATA...................................................... 3-38
3.5.1 Set Display Color of Own Ship’s Track (DISP Own Track Color) ..................3-38
To Next Page
Loading...
Need help?
General
