JRC JMA-932B-SA - Page 33

3.5.2 Save Own Ship’s Track Data ...........................................................................3-39
3.5.3 Cancel Saving of Own Ship’s Track Data (Own Track Memory) ......................3-39
3.5.4 Clear Own Ship’s Track Data (Clear Own Track).............................................3-39
3.5.5 Use Expanded Own Ship's Track (Own Track Type) .......................................3-40
3.5.6 Use Water Depth Track (Water Depth Setting) ................................................3-41
3.5.7 Use Water Temperature Track (Water TEMP Setting) .....................................3-42
3.5.8 Use Current Track (Current Setting) ................................................................3-43
3.5.9 Loading and Saving of Own Track (File Operation) .........................................3-44
3.6 DISPLAY USER MAP......................................................................... 3-46
3.6.1 Create User Map (Mark/Line) ..........................................................................3-46
3.6.1.1 Plotting a mark ..........................................................................................3-46
3.6.1.2 Plotting a line ............................................................................................3-47
3.6.1.3 Input Latitude Longitude and Draw Mark/Line...........................................3-48
3.6.2 Set User Map Display (Mark Display Setting)..................................................3-49
3.6.3 Edit User Map (Edit User Map)........................................................................3-51
3.6.4 Correct Position on User Map (Shift User Map)...............................................3-58
3.6.5 User Map File Operation..................................................................................3-59
3.7 USE ROUTE FUNCTION ................................................................... 3-62
3.7.1 Display Route ..................................................................................................3-62
3.7.2 Use Route Monitoring Function .......................................................................3-63
3.8 APPLIED OPERATIONS.................................................................... 3-64
3.8.1 Set Radar Signal Processing (Process Setting) ..............................................3-64
3.8.2 Set Radar Trails (RADAR Trails Setting) .........................................................3-66
3.8.3 Set Scanner Unit (TXRX Setting) ....................................................................3-68
3.8.4 Set Own Ship Mark (Own Ship Setting)...........................................................3-69
3.8.5 Setting of Danger Detection (Danger Detection Setting) .................................3-70
3.8.6 Monitoring Dragging Anchor (Anchor Watch)...................................................3-71
3.8.7 MOB (Man Over Board)...................................................................................3-72
3.8.8 Set Radar Display (Display Setting).................................................................3-73
3.8.9 Adjust Sound Volume (Buzzer Volume) ...........................................................3-75
3.8.10 Screen Capture Setting .................................................................................3-76
3.8.11 Set User Option Keys [OPTION 1/2]..............................................................3-77
3.8.12 Set Navigation Data Display (Multi Window Setting) .....................................3-79
3.8.13 Setting of NAVTEX message display.............................................................3-84
3.9 USE FUNCTION KEY....................................................................... 3-91
3.9.1 Operation Procedures......................................................................................3-91