103
11 Device manager
Device info
Chapter 11.1 "Device info", page 104
Audit Trail
Chapter 11.2 "Audit Trail", page 107
User area
A user area can contain up to 25 parameters. A parameter relates either to a process value
(analog, digital, integer, or text variable) or a configuration parameter of the system.
In order for a user area to be available in the device manager, it must be configured in advance.
It is possible to have up to three user areas.
Chapter 14.1 "User area", page 205
Configuration
This function can be used to change the configuration of the system. The description of the con-
figuration is spread across multiple chapters in this operating manual.
Chapter 13 "Configuration", page 117.
Parameterization
Chapter 12 "Parameterization", page 113
Program schema
Chapter 11.3 "Program schema", page 108
Service
Special functions are located in the "Service" area.
Calibrate touchscreen
The user can use this function to calibrate the screen.
➥ The screen is calibrated.
NOTE!
A change to the configuration leads to the current record being closed and the new data being
recorded such that it is chronologically separated from the "old" data. The data before and
after the reconfiguration cannot be displayed as a whole on the PC. The system works with
a new configuration.
NOTE!
These functions must only be called up if the user is requested to do so by a service techni-
cian from the manufacturer.
Step Activity
1 Start the program.
2 Follow the instructions on the screen.
To Next Page
Loading...
