231
14 Configuration – in setup program only
Bar graph
Setup dialog
Parameter
Signal color
In order for the bar to be visible, the signal and background color must differ from one another.
If the "Transparent" setting is selected (), this applies with regard to the background color of the
process screen.
Parameter Selection/settings Description
Source Analog signal whose value is displayed as a bar graph.
Inactive No signal selected.
(Display: Bar at "0")
Select module and corresponding sig-
nal.
The signal must be of the "Float" data
type.
Signal color Select color (drop-down menu). Color of the bar within the object
Scale start Enter value (integer) Lower value for bar graph display scal-
ing
Scale end Enter value (integer) Upper value for bar graph display scal-
ing
To Next Page
