Juniper MX10 - Page 126

}
name-server {
address;
}
}
interfaces {
fxp0 {
unit 0 {
family inet {
address address/prefix-length;
}
}
}
}
16. Commit the configuration to activate it on the router.
[edit]
root@# commit
17. (Optional) Configure additional properties by adding the necessary configuration
statements. Then commit the changes to activate them on the router.
[edit]
root@host# commit
18. When you have finished configuring the router, exit configuration mode.
[edit]
root@host# exit
root@host>
Related
Documentation
• Connecting MX5, MX10, MX40, and MX80 Routers to Management Devices on page 97
• Powering On an AC-Powered MX5, MX10, MX40, and MX80 Router on page 90
• Powering On a DC-Powered MX5, MX10, MX40, and MX80 Router on page 94
Copyright © 2017, Juniper Networks, Inc.104
MX5, MX10, MX40, and MX80 3D Universal Edge Router Hardware Guide