Name: Keithley 2001
Brand: Keithley
Rating: 5 (1 reviews)

To Next Page

To Previous Page

IEEE-488 Reference

4-135

:STATe

[:SENSe[1]]:CURRent:AC:REFerence:STATe Control reference for ACI

[:SENSe[1]]:CURRent[:DC]:REFerence:STATe Control reference for DCI

[:SENSe[1]]:VOLTage:AC:REFerence:STATe Control reference for ACV

[:SENSe[1]]:VOLTage[:DC]:REFerence:STATe Control reference for DCV

[:SENSe[1]]:RESistance:REFerence:STATe Control reference for Ω2

[:SENSe[1]]:FRESistance:REFerence:STATe Control reference for Ω4

[:SENSe[1]]:FREQuency:REFerence:STATe Control reference for FREQ

[:SENSe[1]]:TEMPerature:REFerence:STATe Control reference for TEMP

Parameters = 1 or ON Enable reference

= 0 or OFF Disable reference

Formats :curr:ac:ref:stat :curr[:dc]:ref:stat

:volt:ac:ref:stat :volt[:dc]:ref:stat

:res:ref:stat :fres:ref:stat

:freq:ref:stat :temp:ref:stat

Defaults Power-up Saved power-on setup

*RST OFF (all functions)

:SYSTem:PRESet OFF (all functions)

Query :STATe? Query state of reference

Short-form formats: :curr:ac:ref:stat? :curr[:dc]:ref:stat?

:volt:ac:ref:stat? :volt[:dc]:ref:stat?

:res:ref:stat? :fres:ref:stat?

:freq:ref:stat? :temp:ref:stat?

Response message: 1 (on) or 0 (off)

Description These commands are used to enable or disable Reference for the speciﬁed function. When en-

abled, the displayed reading will include the programmed reference value (see :REFerence <n>

and :ACQuire). When disabled, the displayed reading will not include the reference value.

Programming example 10 OUTPUT 716; “:curr:ac:ref 1; ref:stat on; ref:stat?”

20 ENTER 716; A$

30 PRINT A$

40 END

Line 10 Three commands in this program message; the ﬁrst sets a reference value of 1A, the

second enables Reference, and the third queries Reference (on or off).

Line 20 Addresses the Model 2001 to talk.

Line 30 Displays the status of Reference (1; on).

Keithley 2001 Specifications

General

Keithley 2001 User Manual

Other manuals for Keithley 2001