Keysight Technologies N9030B

40 N9030B PXA Signal Analyzer Service Guide
Overview
Service Equipment You Will Need
4.4 GHz Low Pass
(2 Required)
(for Normal Variant only)
Cutoff frequency: 4.4 GHz
Rejection at > 5.5 GHz:> 42 dB
Insertion Loss at 1.8 GHz: < 1 dB
VSWR: ≤1.50:1, DC to 1.8 GHz
Connector: SMA (f) to SMA (f)
K + L
ML253-4499/XU-N/N
P
9135-0005
360D
P
5.0 GHz Low Pass 3 dB frequency: 5.25 GHz
60 dB Rejection: > 6.7 GHz
VSWR: 1.35:1
RLC F-30-5000-RF P
8.0 GHz Low Pass 3 dB frequency: 8.4 GHz
60 dB Rejection: > 10.8 GHz
VSWR: 1.35:1
RLC F-30-8000-RF P
12.4 GHz Low Pass 3 dB frequency: 13 GHz
60 dB Rejection: > 16.74 GHz
VSWR: 1.35:1
RLC F-30-12.4-RF P
Adapters
Type-N (f) to Type-N (f) Frequency: DC to 18 GHz
VSWR: ≤ 1.13:1
1250-1472 P
Type-N (m) to Type-N (m) Frequency: DC to 18 GHz
VSWR: ≤ 1.13:1
1250-1475 P
Type-N (f) to BNC (m) Frequency: DC to 1.3 GHz
VSWR: ≤ 1.13:1
1250-1477 P, T
Type-N (m) to BNC (m) Frequency: DC to 1.3 GHz
VSWR: ≤ 1.13:1
1250-1473 P, T
Type-N (m) to BNC (f) Frequency: DC to 1.3 GHz
VSWR: ≤ 1.13:1
1250-1476 P
Type-N (m) to
3.5 mm (m)
Frequency: DC to 18 GHz
VSWR: ≤ 1.08:1
1250-1743
Type-N (m) to 3.5 mm (f)
(2 Required)
Frequency: DC to 18 GHz
VSWR: ≤ 1.08:1
1250-1744
Type-N (f) to 3.5 mm (f)
(for 3.5 mm source)
Frequency: DC to 18 GHz
VSWR: ≤ 1.08:1
1250-1745
Type-N (f) to 3.5 mm (m) Frequency: DC to 18 GHz
VSWR: ≤ 1.14:1
1250-1750
3.5 mm (f) to 3.5 mm (f)
(for 3.5 mm source)
Frequency: DC to 26.5 GHz
VSWR: ≤ 1.05:1
83059B 1250-1749 P
Table 1-1 Required Test Equipment
Instrument Critical Specifications Recommended
Keysight Model
Number
a
or Vendor
Model Number
Alternative
Keysight Model
Number
a
Use
b