N9030B PXA Signal Analyzer Service Guide 577
Functional Tests
Test Equipment
Preamp
other than
P03
Low Power Sensor
Frequency Range: 50 MHz to 50 GHz
c
Amplitude Range: –70 to –20 dBm
8487D
8485D
c
Miscellaneous Equipment
All Filter, 50 MHz Low Pass Cutoff Frequency: 50 MHz
Rejection at 65 MHz: > 40 dB
Rejection at 75 MHz: > 60 dB
Rejection at 80 MHz: > 60 dB
Frequency: 10 MHz to 26.5 GHz
0955-0306
544, 550 Power Splitter, 2.4 mm Nominal Insertion Loss: 8.5 dB
Tracking Between Ports: < 0.4 dB
11667C
526 Power Splitter, 3.5 mm Nominal Insertion Loss: 6 dB
Tracking Between Ports: < 0.25 dB
11667B
503, 508,
513
Power Splitter Nominal Insertion Loss: 6 dB
Tracking Between Ports: < 0.25 dB
11667A 11667B
All Termination, 50 W Type N (m) Connector
Frequency: 30 Hz to 26.5 GHz
909A
Option 012
BBA Termination, 50 W BNC (m) Connector
Frequency: 250 kHz to 40 MHz
11593A
a. Maximum frequency equal to or greater than the maximum frequency of the PXA.
b. PSG model numbers: E8244A, E8254A, E8247C Option 520, E8247C Option H31 or 540, E8257D
Option 520, E8257D Option 550, E8257D Option 567, E8267D Option 544.
c. Maximum frequency equal to or greater than the maximum frequency of the preamplifier option.
Table 18-1
Analyzer
Option
Item Critical Specifications
Recommended
Keysight Model
Alternate
Keysight
Model
To Next Page
Loading...
Need help?
General
