Keysight DAQ970A User Guide

4. Press Copy Now. The measurement configuration from channel 01 will copy to channel 02.
"COMPLETE" message will prompt out when the operation is completed. Press Copy Now to
repeatedly copy the same configuration to the new selected channels (channel 03, channel 04, and so
on).
Copy/paste from a single channel to multiple channels (one-to-many)
For example, to copy/paste the measurement configuration from channel 01 to channel 02 and 03:
1. Press [Channel] and use the knob or the front panel arrow keys to configure channel 01 as DCV (Autor-
ange).
2. Press [Copy] > Source Chan(s). Both Start Channel and End Channel will be displayed with the selec-
ted channel 01 as there is no any other configured source channel except this channel. Press Done to
exit this menu.
3. Press Dest. Chan(s) to select the destination channel for the paste operation. The instrument will auto-
matically select the subsequent channel as default choice of destination channels. In this example, use
the knob or the front panel arrow keys to determine both Start Channel as channel 02 and End Chan-
nel as channel 03. Press Done to proceed.
Keysight DAQ970A User's Guide 141
[Channel] Menu Overview

Keysight DAQ970A Specifications

General

Scan Rate	Up to 450 channels/sec
Connectivity	USB, LAN, GPIB (optional)
Display	4.3-inch color LCD
Operating Temperature	0 °C to 50 °C
Number of slots	3 slots
Measurement Types	DCV, ACV, DCI, ACI, 2-wire resistance, 4-wire resistance, frequency, temperature, capacitance
Voltmeter	6.5 digit
Resolution	22 bits
Memory	Non-volatile memory