Keysight DAQ970A User Guide

Secure - Enables (On) or disables (Off) the instrument security. When On, NISPOM Sanitize softkey will
appear and security must be unlocked to make changes to I/O enables and configuration.
NISPOMSanitize sanitizes all user-accessible instrument memory except for the calibration constants and
reboots the instrument. This complies with requirements in chapter 8 of the National Industrial Security
Program Operating Manual (NISPOM). When Off, I/O changes can be made without unlocking security.
The
NISPOM Sanitize
softkey and the SYSTem:SECurity:IMMEdiate command are equivalent. They
are for customers, such as military contractors, who must comply with NISPOM.
This feature destroys all user-defined state information, measurement data, and user-defined I/O set-
tings such as the IP address. This feature is not recommended for use in routine applications
because of the possibility of unintended data loss.
Admin
Press Firmware Update to update the instrument firmware to a new version. See Firmware Update details.
Keysight DAQ970A User's Guide 151
[Channel] Menu Overview

Keysight DAQ970A Specifications

General

Scan Rate	Up to 450 channels/sec
Connectivity	USB, LAN, GPIB (optional)
Display	4.3-inch color LCD
Operating Temperature	0 °C to 50 °C
Number of slots	3 slots
Measurement Types	DCV, ACV, DCI, ACI, 2-wire resistance, 4-wire resistance, frequency, temperature, capacitance
Voltmeter	6.5 digit
Resolution	22 bits
Memory	Non-volatile memory