Keysight DAQ970A User Guide

4. Press Copy Now. The measurement configuration from channel 01 will copy to both channel 02 and
03. "COMPLETE" message will prompt out when the operation is completed. Press Copy Now to
repeatedly copy the same configuration to the new selected channels (channel 04, channel 05, and so
on).
Copy/paste from multiple channels to multiple channels (many-to-many)
For example, to copy/paste the measurement configuration from channels 01 through 04 to channels 05
through 08:
1. Press [Channel] and use the knob or the front panel arrow keys to configure the source channels as
below:
l Channel 01 (DCV with Autorange)
l Channel 02 (ACV with the range of 100 mV)
l Channel 03 (2-wire resistance with the range of 100 Ω)
l Channel 04 (4-wire resistance with the range of 1 kΩ)
2. Press [Copy] > Source Chan(s). Use the knob or the front panel arrow keys to determine the Start
Channel as channel 01 while End Channel as channel 04. Press Done to exit this menu.
[Channel] Menu Overview
142 Keysight DAQ970A User's Guide

Keysight DAQ970A Specifications

General

Scan Rate	Up to 450 channels/sec
Connectivity	USB, LAN, GPIB (optional)
Display	4.3-inch color LCD
Operating Temperature	0 °C to 50 °C
Number of slots	3 slots
Measurement Types	DCV, ACV, DCI, ACI, 2-wire resistance, 4-wire resistance, frequency, temperature, capacitance
Voltmeter	6.5 digit
Resolution	22 bits
Memory	Non-volatile memory