Keysight DAQ970A User Guide

[Save Recall] Menu
File management
Save state/preferences, readings, and screen captures
Recalls a previously saved state file or preferences file
Return selected settings to their Preset values
Data logging to USB drive on the front panel
Manage Files
The Manage Files softkey allows you to create, copy, delete, and rename files and folders in the instru-
ment's internal flash memory or on a USB drive attached to the front panel. This is the default option, as
shown below.
Action
Browse
Copy Path
Perform Copy
Action
Action specifies the file or folder action to perform.
Delete - To delete a file or folder, press Delete and Browse to the file or folder to be deleted. Press Select
> Perform Delete > Done.
Folder - To create a folder, press Folder and Browse to the internal or external location for the folder,
press File Name, enter a folder name and press Done. Press Create Folder > Done.
Copy - To copy a file or folder, press Copy. Browse to the file or folder to be copied and press Select. Press
Copy Path and select an internal or external path for copying. Press Perform Copy > Done.
Rename - To rename a file or folder, press Rename. Browse to the file or folder to be renamed and press
Select. Press New Name, enter a new name and press Done. Press Perform Rename > Done.
[Channel] Menu Overview
154 Keysight DAQ970A User's Guide

Keysight DAQ970A Specifications

General

Scan Rate	Up to 450 channels/sec
Connectivity	USB, LAN, GPIB (optional)
Display	4.3-inch color LCD
Operating Temperature	0 °C to 50 °C
Number of slots	3 slots
Measurement Types	DCV, ACV, DCI, ACI, 2-wire resistance, 4-wire resistance, frequency, temperature, capacitance
Voltmeter	6.5 digit
Resolution	22 bits
Memory	Non-volatile memory