Keysight DAQ970A User Guide

Notices 6
Copyright Notice 6
Manual Part Number 6
Edition 6
Published by 6
Software Revision 6
Warranty 7
Technology Licenses 7
Restricted Rights Legend 7
Waste Electrical and Electronic Equipment (WEEE) 7
Declarations of Conformity 8
Safety and Regulatory Information 9
Safety Considerations 9
Safety Symbols and Regulatory Markings 11
South Korean Class A EMCDeclaration 13
Safety and EMC Requirements 14
Environmental Conditions 14
1 Introduction to the Instrument 16
Instrument at a Glance 17
Front Panel at a Glance 18
Instrument Annunciators 19
Rear Panel at a Glance 20
Plug-In Modules at a Glance 21
Dimension Diagram 22
Remote Interface Configuration 23
Keysight IOLibraries Suite 23
LAN Settings 23
LANServices 29
Set to Defaults 30
LAN Reset 30
Web Interface 30
More about IP addresses and dot notation 30
USB Settings 30
Technical Connection Details 32
LAN Configuration Procedure 33
Firmware Update 35
Contacting Keysight Technologies 36
2 Quick Start 37
Prepare Instrument for Use 38
Module Wiring Connection and Installation 39
Connect Power and I/O Cables 43
To turn on the instrument 43
Power-on self test 43
To turn off the instrument 43
Use the Built-in Help System 44
View the list of help topics 44
View the help information for a front panel key 45
View the instrument information 45
Adjust the Carrying Handle 46
Rack Mounting the Instrument 47
Keysight BenchVue Data Acquisition (DAQ) Software 49
2 Keysight DAQ970A User's Guide

Keysight DAQ970A Specifications

General

Scan Rate	Up to 450 channels/sec
Connectivity	USB, LAN, GPIB (optional)
Display	4.3-inch color LCD
Operating Temperature	0 °C to 50 °C
Number of slots	3 slots
Measurement Types	DCV, ACV, DCI, ACI, 2-wire resistance, 4-wire resistance, frequency, temperature, capacitance
Voltmeter	6.5 digit
Resolution	22 bits
Memory	Non-volatile memory