Keysight DAQ970A User Guide

5. Configure the "DNS Setup" (optional)
The DNS (Domain Name Service) is an Internet service that translates domain names into IP addresses.
Ask your network administrator whether the DNS is in use, and if it is, for the host name, domain name,
and DNS server address to use.
a. Set the "hostname". Press Host Name and enter the hostname. A hostname is the host portion of
the domain name, which is translated into an IP address. The hostname is entered as a string using
the front panel arrow keys to select and change characters. The hostname may include letters,
numbers, and dashes ("-").
b. Set the "DNS Server" addresses. From the LAN configuration screen, press More to go to the
second of three sets of softkeys.
Enter the Primary DNS and Second DNS. See your network administrator for details.
1 Introduction to the Instrument
34 Keysight DAQ970A User's Guide

Keysight DAQ970A Specifications

General

Scan Rate	Up to 450 channels/sec
Connectivity	USB, LAN, GPIB (optional)
Display	4.3-inch color LCD
Operating Temperature	0 °C to 50 °C
Number of slots	3 slots
Measurement Types	DCV, ACV, DCI, ACI, 2-wire resistance, 4-wire resistance, frequency, temperature, capacitance
Voltmeter	6.5 digit
Resolution	22 bits
Memory	Non-volatile memory