Keysight DAQ970A User Guide

To configure the strain offset:
1. In Select softkey, use the knob or the front panel arrow keys to enable the strain offset measurement
on the highlighted channel to perform. Currently selected channel is marked with an "X". Press this
softkey again to disable the offset measurement on the highlighted channel. Pressing this softkey will
enable the Measure Now and Clear Offsets softkeys.
2. Press Select All to enable the offset measurement on all listed channels. Press this softkey again to dis-
able the offset measurement on all listed channels.
3 Features and Functions
76 Keysight DAQ970A User's Guide

Keysight DAQ970A Specifications

General

Scan Rate	Up to 450 channels/sec
Connectivity	USB, LAN, GPIB (optional)
Display	4.3-inch color LCD
Operating Temperature	0 °C to 50 °C
Number of slots	3 slots
Measurement Types	DCV, ACV, DCI, ACI, 2-wire resistance, 4-wire resistance, frequency, temperature, capacitance
Voltmeter	6.5 digit
Resolution	22 bits
Memory	Non-volatile memory