Lenovo ThinkSystem SR630 V4 - Page 104

Rack front
Figure 80. Pulling out the rails
a.
Extend the inner rails.
b.
Push up the latches to disengage inner rails from the intermediate ones.
c.
Remove the inner rails.
Step 2. Install the inner rail to the server. Align the slots on the inner rail with the corresponding T-pins on
the side of the server; then, slide the inner rail forwards until the T-pins lock into place with the inner
rail.
Notes:
1. Make sure that the stamp “Front” always faces toward the front when assembling the inner
rails to the server.
2. “L” and “R” stamps indicate the left and right sides of the rails.
Figure 81. Installing inner rails
Step 3. Repeat the previous step to the other rail.
Step 4. Carefully lift up the server with three people.
CAUTION:
94
ThinkSystem SR630 V4 User Guide