Figure 84. Locking rails and sliding in the server
a. Push up the latches on the rails.
b.
Push the server all the way into the rack until both latches lock into position with a click.
Step 6. Secure the server to the rack.
a. Secure the server to the front of the rack.
Rack front
Figure 85. Securing the server to the front of the rack
Flip down the covers on the rack latches.
Tighten the screws to secure the server.
b. (Optional) Install one M6 screw to each of the rails to secure the server to the rear of the rack.
96
ThinkSystem SR630 V4 User Guide
To Next Page
Loading...
