Lenovo ThinkSystem SR630 V4 - Page 182

Figure 174. Quick connect plug removal
a. Press the latch down to unlock the hose.
b.
Pull the hose off.
c.
Re-install the rubber quick connect plug covers to the ports on the manifold.
Step 4. Repeat
Step 3 on page 171 to the other manifold.
Step 5. Disengage the connection set from ball valves.
Note: Disengage the return side first, then disengage the supply side.
Figure 175. Removing the connection set
a. Rotate the ball valve to the left.
b.
Pull the connection set off from ball valve.
Step 6. Remove the return manifold with the connection set attached.
172
ThinkSystem SR630 V4 User Guide