Figure 182. Installing the manifold
a. Hold the manifold with both hands, and mount it onto the rack cabinet.
b.
Align the spools with holes, and clutch the cabinet.
Note: For more information about the rack cabinet, see
ThinkSystem Heavy Duty Full Depth Rack
Cabinets User Guide
.
Step 5. Repeat
Step 4 on page 179 to the other manifold.
Step 6. Separate ball valves from connection sets.
Note: One end of a connection set comes with a detachable ball valve, and the two parts are
connected by a ferrule. Remove the ferrule to separate the ball valve that is bound for CDU in Step
7 on page 181
.
180
ThinkSystem SR630 V4 User Guide
To Next Page
Loading...
