Figure 4. Rear view with two low profile and one full height PCIe adapters
Table 11. Components on the rear of the server
Callout Callout
1 Power supply unit 1
2 PCIe slot 1 on riser 1 assembly
3 PCIe slot 2 on riser 1 assembly 4 System ID LED
5 System error LED
6 RoT fault LED
7 PCIe slot 3 on riser 2 assembly
8 Power supply unit 2
9 Ethernet connectors on rear OCP module 2 (optional) 10 XCC system management port (10/100/1000 Mbps
RJ-45)
11 USB 3.2 Gen 1 (5Gbps) connectors (3 DCIs) 12 VGA connector
13 Ethernet connectors on rear OCP module 1 (optional)
Note: For more information about each component, see
“Rear components overview” on page 27.
Server model with two PCIe slots
The following illustration shows the rear views of the server model with two PCIe slots. Depending on the
model, your server might look slightly different from the illustration below.
Figure 5. Rear view with two full height PCIe adapters
Table 12. Components on the rear of the server
Callout Callout
1 Power supply unit 1
2 PCIe slot 1 on riser 1 assembly
3 System ID LED 4 System error LED
5 RoT fault LED
6 PCIe slot 3 on riser 2 assembly
7 Power supply unit 2
8 Ethernet connectors on rear OCP module 2 (optional)
9 XCC system management port (10/100/1000 Mbps RJ-
45)
10 USB 3.2 Gen 1 (5Gbps) connectors (3 DCIs)
11 VGA connector 12 Ethernet connectors on rear OCP module 1 (optional)
24 ThinkSystem SR630 V4 User Guide
To Next Page
Loading...
