Server model with two PCIe slots and a Processor Neptune
TM
Core Module (NeptCore)
The following illustration shows the rear view of the server model with two PCIe slots and a Processor
Neptune
TM
Core Module (NeptCore). Depending on the model, your server might look slightly different from
the illustration below.
Table 15. Components on the rear of the server
1 Power supply unit 1
2 PCIe slot 1 on riser 1 assembly
3 Hose holder 4 Inlet hose
5 Outlet hose 6 PCIe slot 3 on riser 2 assembly
7 Power supply unit 1
8 Ethernet connectors on rear OCP module 2 (optional)
9 RoT fault LED
10 System error LED
11 System ID LED 12 XCC system management port (10/100/1000 Mbps
RJ-45)
13 USB 3.2 Gen 1 (5Gbps) connectors (3 DCIs) 14 VGA connector
15 Ethernet connectors on rear OCP module 1 (optional)
Note: For more information about each component, see
“Rear components overview” on page 27.
Server model with a NeptCore module and rear M.2 drives
The following illustration shows the rear view of the server model with a NeptCore module and rear M.2
drives. Depending on the model, your server might look slightly different from the illustration below.
Table 16. Components on the rear of the server
1 Power supply unit 1
2 PCIe slot 1 on riser 1 assembly
3 Hose holder 4 Inlet hose
5 Outlet hose 6 System ID LED
7 System error LED
8 RoT fault LED
9 Rear M.2 drive assembly 10 Power supply unit 2
11 Ethernet connectors on rear OCP module 2 (optional) 12 XCC system management port (10/100/1000 Mbps
RJ-45)
26 ThinkSystem SR630 V4 User Guide
To Next Page
Loading...
