Lenovo ThinkSystem SR630 V4 - Page 88

• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 75.
• Keep static-sensitive parts in their static-protective packages until installation to prevent exposure to
static electricity. Handle the parts with an electrostatic-discharge wrist strap or other grounding systems.
Place the parts on a static-protective surface.
CAUTION:
Make sure to have three people operate the server installation procedures to prevent injury.
Procedure
Step 1. Install the rear mounting pins to the rack.
Figure 62. Installing rear mounting pins
a. Extend the outer rail toward the rear mounting flanges in the rack.
b. Align the mounting pins with the rear mounting flanges and set the opening of the rear latch
against the rack frame.
c.
Push the rail toward outside of the rack until the rear latch opens.
d.
Push the rail toward the rear mounting flanges.
e.
Rotate the rear latch back to the closed position.
Step 2. Install the front mounting pins to the rack.
78
ThinkSystem SR630 V4 User Guide