Lenze I/O system 1000 - Page 520

Lenze · I/O system 1000 · Reference Manual · DMS 5.0 EN · 09/2016 · TD17 520
9 PROFINET communication
9.8 Parameterising the counter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Diagnostic function Diagnostic functions are provided by the modules.
Diagnostic information The diagnostic information describes the diagnostic contents that can be read out of
a module. Diagnostic information is not automatically sent by the module but must
be read out actively via SDO access.
Additional functions Description