Lenze I/O system 1000 - Page 60

Lenze · I/O system 1000 · Reference Manual · DMS 5.0 EN · 09/2016 · TD17 60
4 Configuring the I/O system in the »PLC Designer«
4.3 Mapping the real station structure in the »PLC Designer«
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Adding the CANopen Manager to the CANbus
4. Select the "CANbus" device in the device view:
5. Now select the "CANopen Manager MC-CAN2" in the still open Add Device dialog box.
6. Click Add Device to add the selected device to the CANbus.
•The Add Device dialog box remains open.
Adding the CANopen bus coupler module (slave) to the CANopen Manager
7. Select the "CANopen_Manager_MC_CAN2" device in the device view:
8. Now select the "EPM-S110" device (CANopen bus coupler module) in the still open Add
Device dialog box.
9. Click Add Device to add the selected device to the CANopen Manager.
•The Add Device dialog box remains open.