Lenze i410 - Page 133

Address Name / seng range / [default seng] Informaon
0x2949:002
(P337.02)
Torque limit source selecon:
Negave torque limit
source
(Trq. lim. source: Neg. torqlim src)
•
From version 03.00
Selecon of the source for the negave torque limit source.
0 (-) Max torque Negave torque limit source = (-) Max torque 0x6072 (P326.00).
1 Fixed Limit 0.0 % Negave torque limit source = 0.0 %.
2 Analog Input 1 The negave torque limit source is dened as analog signal via the
analog input 1.
4Analog input 1 ^ 205
3 Analog Input 2 The
negave torque limit source is dened as analog signal via the
analog input 2.
4Analog input 2 ^ 209
4 Negave torque limit Negave torque limit source = Negave torque limit 0x60E1.
5 Network target torque The negave torque limit source is dened as process data object via
ne
twork.
Funcon is not supported in this device.
201 Internal value (from version 05.03) Internal values of the manufacturer.
202 Internal value (from version 05.03)
203 Internal value (from version 05.03)
204 Internal value (from version 05.03)
205 Internal value (fr
om version 05.03)
206 Internal value (from version 05.03)
0x60E0 Posive torque limit
0.0 ... [250.0] ... 3276.7 %
•
Fr
om version 02.00
Posive torque limit source for speed control with torque limitaon.
•
100 % = Ra
ted Motor Torque. 40x6076 (P325.00)
0x60E1 Negave torque limit
0.0 ... [250.0] ... 3276.7 %
•
Fr
om version 02.00
Negave torque limit source for speed control with torque limitaon.
•
100 % = Ra
ted Motor Torque 40x6076 (P325.00)
Conguring the torque control
Basic seng
Torque limits
133