Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 104
Balanced: Uses the X resolution at the middle of the active area as the spacing interval. This setting
balances CPU load, data output rate, and X resolution.
Resolution: Uses the highest X resolution within the active area as the spacing interval. This setting
maximizes resolution but has higher CPU load and has the highest data output rate (i.e., greatest detail).
l
Choose Custom and move the slider to a precise value.
7. Select a spacing interval level.
8. Save the job in the Toolbar by clicking the Save button .
Material
Profile data acquisition can be configured to suit different types of target materials. This helps maximize
the number of useful profile points produced. For many targets, changing the setting is not necessary,
but it can make a great difference with others.
For Gocator 2380 sensors (revision B or later),use the Sensitivity Compensation setting (not shown
below) to make the sensitivity of the sensor compatible with revision A sensors. This setting is enabled
by default.
Preset material types can be selected in the Materials setting.
When Materials is set to Custom, the following settings can be configured:
To Next Page
Loading...
