LMI Technologies Gocator Series - Profileroundcorner

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 317
Element Type Description
Scale 64f Output scaling factor.
Offset 64f Output offset factor.
DecisionMin 64f Minimum decision threshold.
DecisionMax 64f Maximum decision threshold.
ProfileRoundCorner
A ProfileRoundCorner element defines settings for a profile round corner tool and one or more of its
measurements.
Element Type Description
Name String Tool name.
Source 32s Profile source.
Anchor\X String (CSV) The X measurements (IDs) used for anchoring.
Anchor\X.options String (CSV) The X measurements (IDs) available for anchoring.
Anchor\Z String (CSV) The Z measurements (IDs) used for anchoring.
Anchor\Z.options String (CSV) The Z measurements (IDs) available for anchoring.
StreamOptions Collection
A collection of StreamOption on page 299 elements.
Stream\Step
32s The stream source step. Possible values are:
1 – Video
2 – Range
3 – Surface
4 – Section
Stream\Id 32u The stream source ID.
RefDirection 32s
Setting for reference side to use:
0 – Left
1 – Right
Edge
ProfilePanelEdge
Element for edge configuration
Measurements\X Round Corner tool
measurement
X measurement.
Measurements\Z Round Corner tool
measurement
Z measurement.
Measurements\Angle Round Corner tool
measurement
Angle measurement.
ProfileRoundCorner Child Elements
Element Type Description
EdgeType 32s
Edge type:
0 – Tangent
ProfilePanelEdge