LMI Technologies Gocator Series - Downloading and Uploading Jobs

Gocator Line Profile Sensors: User Manual
Gocator Emulator • 268
To export recorded intensity data to the BMP format:
l
Click the Export button and select Intensity data as BMP.
Only the intensity data in the current replay location is exported.
Use the playback control buttons to move to a different replay location; for information on playback,
see To replay data in Playback and Measurement Simulation on page 264.
Downloading and Uploading Jobs
The Jobs category on the Manage page lets you manage the jobs in the emulator.
Element Description
Namefield Used to provide a job name when saving files.
Jobs list Displays the jobs that are currently saved in the emulator.
Save button
Saves current settings to the job using the name in the Name field. Changes to job files are not
persistent in the emulator. To keep changes, first save changes in the job file, and then download the
job file to a client computer. See the procedures below for instructions.
Load button Loads the job that is selected in the job list. Reloading the current job discards any unsaved changes.
Delete button Deletes the job that is selected in the job list.