LMI Technologies Gocator Series - Edgefiltering; Partmatching

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 295
Element Type Description
MaxLength.min 64f Minimum value of maximum length (mm).
MaxLength.max 64f Maximum value of maximum length (mm).
MaxLength.used Bool Whether or not this field is used.
FrameOfReference 32s
Part frame of reference:
0 – Sensor
1 – Scan
2 – Part
FrameOfReference.used Bool Whether or not this field is used.
FrameOfReference.value 32s Actual value.
EdgeFiltering Section
See EdgeFiltering below.
EdgeFiltering
Element Type Description
@used Bool Whether or not this section is used.
Enabled Bool Enables edge filtering.
PreserveInteriorEnabled Bool Enables preservation of interior.
ElementWidth 64f Element width (mm).
ElementWidth.min 64f Minimum element width (mm).
ElementWidth.max 64f Maximum element width (mm).
ElementLength 64f Element length (mm).
ElementLength.min 64f Minimum element length (mm).
ElementLength.max 64f Maximum element length (mm).
EdgeFiltering Child Elements
PartMatching
The PartMatching element contains settings related to part matching.
Element Type Description
Enabled Bool Enables part matching.
Enabled.used Bool Whether or not this field is used.
MatchAlgo 32s
Match algorithm.
0 – Edge points
1 – Bounding Box
2 – Ellipse
Edge Section
See Edge on the next page.
BoundingBox Section
See BoundingBox on the next page.
Ellipse Section
See Ellipse on the next page.
PartMatching Child Elements