Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 257
** When the sensor is accelerated, the indicator's value is the sum of the values reported from the
sensor and the accelerating PC.
Measurements
Measurement statistics are displayed for each measurement that has been configured on the Measure
page. Use the Reset button to reset the statistics.
The following information is available for each measurement:
Name Description
Measurements The measurement IDand name.
Value The most recent measurement value.
Min/Max The minimum and maximum measurement values that have been observed.
Avg The average of all measurement results collected since the sensor was
started.
Std The standard deviation of all measurement results collected since the sensor
was started.
Pass/Fail The counts of pass or fail decisions that have been generated.
Invalid The count of frames from which no feature points could be extracted.
Dashboard Measurement Statistics
To Next Page
Loading...
