Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 122
Data Viewer Controls
The data viewer is controlled by mouse clicks and by the buttons on the display toolbar. The mouse
wheel can also be used for zooming in and out.
Press 'F' when the cursor is in the data viewer to switch to full screen.
Video Mode
In Video mode, the data viewer displays a camera image. In a dual-sensor system, camera images from
the Main or the Buddy sensor can be displayed. In this mode, you can configure the data viewer to
display additional information that can be useful in properly setting up the Gocator for scanning.
Exposure Information
In Video mode, you can display exposure-related information.
Exposures
If you have set Exposure Mode to Multiple, and have set more than one exposure, a drop-down is
displayed at the top of the data viewer. This drop-down lists the available exposures. Choosing an
exposure changes the view of the data viewer to that exposure. For details on setting exposure in the
Exposure tab in the Sensor panel, see on page 98.
To Next Page
Loading...
