LMI Technologies Gocator Series - Partdetection

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 294
PartDetection
Element Type Description
Enabled Bool Enables part detection.
Enabled.used Bool Whether or not this field is used.
Enabled value Bool Actual value used if not configurable.
Threshold 64f Height threshold (mm).
Threshold.min 64f Minimum height threshold (mm).
Threshold.max 64f Maximum height threshold (mm).
ThresholdDirection 32u
Threshold direction:
0 – Above
1 – Below
MinArea 64f Minimum area (mm
2
).
MinArea.min 64f Minimum value of minimum area.
MinArea.max 64f Maximum value of minimum area.
MinArea.used Bool Whether or not this field is used.
GapWidth 64f Gap width (mm).
GapWidth.min 64f Minimum gap width (mm).
GapWidth.max 64f Maximum gap width (mm).
GapWidth.used Bool Whether or not this field is used.
GapLength 64f Gap length (mm).
GapLength.min 64f Minimum gap length (mm).
GapLength.max 64f Maximum gap length (mm).
GapLength.used Bool Whether or not this field is used.
PaddingWidth 64f Padding width (mm).
PaddingWidth.min 64f Minimum padding width (mm).
PaddingWidth.max 64f Maximum padding width (mm).
PaddingWidth.used Bool Whether or not this field is used.
PaddingLength 64f Padding length (mm).
PaddingLength.min 64f Minimum padding length (mm).
PaddingLength.max 64f Maximum padding length (mm).
PaddingLength.used Bool Whether or not this field is used.
MinLength 64f Minimum length (mm).
MinLength.min 64f Minimum value of minimum length (mm).
MinLength.max 64f Maximum value of minimum length (mm).
MinLength.used Bool Whether or not this field is used.
MaxLength 64f Maximum length (mm).
PartDetection Child Elements