LMI Technologies Gocator Series - Surfaceellipse

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 327
SurfaceEllipse
A SurfaceEllipse element defines settings for a surface ellipse tool and one or more of its measurements.
Element Type Description
Name String Tool name.
Source 32s Surface source.
Anchor\X String (CSV) The X measurements (IDs) used for anchoring.
Anchor\X.options String (CSV) The X measurements (IDs) available for anchoring.
Anchor\Y String (CSV) The Y measurements (IDs) used for anchoring.
Anchor\Y.options String (CSV) The Y measurements (IDs) available for anchoring.
Anchor\Z String (CSV) The Z measurements (IDs) used for anchoring.
Anchor\Z.options String (CSV) The Z measurements (IDs) available for anchoring.
StreamOptions Collection
A collection of StreamOption on page 299 elements.
Stream\Step
32s The stream source step. Possible values are:
1 – Video
2 – Range
3 – Surface
4 – Section
Stream\Id 32u The stream source ID.
RegionEnabled Boolean Setting to enable/disable region.
Region
Region3D
Measurement region.
AsymmetryDetectionType 32s
Determine whether to use asymmetry detection and if
enabled, which dimension would be the basis of detection.
The possible values are:
0 – None
1 – Major
2 – Minor
Measurements\Major Ellipse tool
measurement
Major measurement.
Measurements\Minor Ellipse tool
measurement
Minor measurement.
Measurements\Ratio Ellipse tool
measurement
Ratio measurement.
Measurements\ZAngle Ellipse tool
measurement
ZAngle measurement.
SurfaceEllipse Child Elements
Element Type Description
@id 32s Measurement ID. Optional (measurement disabled if not
set).
Ellipse Tool Measurement