LMI Technologies Gocator Series - Surfaceplane

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 332
Element Type Description
measurement
Measurements\Width Opening tool
measurement
Width measurement.
Measurements\Length Opening tool
measurement
Length measurement.
Measurements\Angle Opening tool
measurement
Angle measurement.
Element Type Description
id (attribute) 32s Measurement ID. Optional (measurement disabled if not
set).
Name String Measurement name.
Enabled Boolean
Measurement enable state:
0 – Disable
1 – Enable
HoldEnabled Boolean
Output hold enable state:
0 – Disable
1 – Enable
SmoothingEnabled Boolean
Smoothing enable state:
0 – Disable
1 – Enable
SmoothingWindow 32u Smoothing window.
Scale 64f Output scaling factor.
Offset 64f Output offset factor.
DecisionMin 64f Minimum decision threshold.
DecisionMax 64f Maximum decision threshold.
Opening Tool Measurement
SurfacePlane
A SurfacePlane element defines settings for a surface plane tool and one or more of its measurements.
Element Type Description
Name String Tool name.
Source 32s Surface source.
Anchor\X String (CSV) The X measurements (IDs) used for anchoring.
Anchor\X.options String (CSV) The X measurements (IDs) available for anchoring.
Anchor\Y String (CSV) The Y measurements (IDs) used for anchoring.
Anchor\Y.options String (CSV) The Y measurements (IDs) available for anchoring.
Anchor\Z String (CSV) The Z measurements (IDs) used for anchoring.
SurfacePlane Child Elements