LMI Technologies Gocator Series - Get Runtime Variable Count; Set Runtime Variables

Gocator Line Profile Sensors: User Manual
Protocols • 384
Field Type Offset Description
id 16u 4 Reply identifier (0x5000).
status 32s 6
Reply status. For a list of status codes, see Commands on page
350.
progressTotal 32u 10 Progress indicating completion (100%).
progress 32u 14 Current progress.
size 32u 18 Size of the chunk in byes.
data[size] byte 22 Chunk data.
Get Runtime Variable Count
The Get Runtime Variable Count command gets the number of runtime variables that can be accessed.
Field Type Offset Description
length 32u 0 Command size including this field, in bytes.
id 16u 4 Command identifier (0x4537).
Command
Field Type Offset Description
length 32u 0 Reply size including this field, in bytes.
id 16u 4 Reply identifier (0x4537).
status 32s 6 Reply status.
valueLength 32u 10 The count of runtime variables.
Reply
Set Runtime Variables
The Set Runtime Variablescommand sets the runtime variables at the given index for the given length.
Field Type Offset Description
length 32u 0 Command size including this field, in bytes.
id 16u 4 Command identifier (0x4536).
index 32u 6 The starting index of the variables to set.
length 32u 10 The number of values to set from the starting index.
values[length] 32s 14 The runtime variable values to set.
Command
Field Type Offset Description
length 32u 0 Reply size including this field, in bytes.
id 16u 4 Reply identifier (0x4536).
status 32s 6 Reply status.
Reply