LMI Technologies Gocator Series - Line

Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 185
Parameter Description
Reference Type Determines the type of the reference line.
X-Axis:The reference line is set to the X axis.
Z-Axis:The reference line is set to the Z axis
Line:The reference line is defined manually using the Ref
Line parameter. One or two regions can be used to define
the line.
Ref Line Used to define the reference line when Line is selected in
the Reference Type parameter.
Line One or two fit areas can be used for each fit line.
See Fit Lines on page 168 for more information.
Angle Range
(Angle measurement only)
Determines the angle range. The options are:
-90 – 90
0 – 180
Decision See Decisions on page 159.
Region See Regions on page 158.
Filters See Filters on page 161.
Parameters
Line
The Line tool fits a line to the live profile and measures the deviations from the best-fitted line. Gocator
compares the measurement value with the values in Min and Max to yield a decision. For more
information on decisions, see Decisions on page 159.
See Adding and Configuring a Tool on page 156 for instructions on how to add measurement tools.