LMI Technologies Gocator Series - Surfacegeneration; Fixedlength

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 291
Element Type Description
DynamicThreshold 32s Dynamic exposure control threshold. If the detected number of
spots is fewer than this number, the exposure will be increased.
DynamicThreshold.used Bool Determines if the setting’s value is currently used.
DynamicThreshold.value 32s Value in use by the sensor, useful for determining value when
used is false.
DynamicThreshold.min 32s Minimum value.
DynamicThreshold.max 32s Maximum value.
SensitivityCompensationEnabled Bool Sensitivity compensation toggle. Used in determining analog and
digital gain, along with exposure scale.
SensitivityCompensationEnabled.used Bool Determines if the setting’s value is currently used.
SensitivityCompensationEnabled.value Bool Value in use by the sensor, useful for determining value when
used is false.
GammaType 32s Gamma type.
GammaType used Bool Value in use by the sensor, useful for determining value when
used is false.
GammaType value 32s Determines if the setting’s value is currently used.
SurfaceGeneration
The SurfaceGeneration element contains settings related to surface generation.
Element Type Description
Type 32s
Surface generation type:
0 – Continuous
1 – Fixed length
2 – Variable length
3 – Rotational
FixedLength Section
See FixedLength below.
VariableLength Section
See VariableLength on the next page.
Rotational Section
See Rotational on the next page.
SurfaceGeneration Child Elements
FixedLength
Element Type Description
StartTrigger 32s
Start trigger condition:
0 – Sequential
1 – Digital input
Length 64f
Surface length (mm).
Length.min 64f
Minimum surface length (mm).
Length.max 64f
Maximum surface length (mm).
FixedLength Child Elements