LMI Technologies Gocator Series - Disk; Bar

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 286
Element Type Description
@used Bool Whether or not this field is used
InputTriggerEnabled Bool Enables digital input-triggered alignment operation.
InputTriggerEnabled.used Bool Whether or not this feature can be enabled. This feature is available only
on some sensor models.
InputTriggerEnabled.value Bool Actual feature status.
Type 32s
Type of alignment operation:
0 – Stationary
1 – Moving
Type.options 32s (CSV) List of available alignment types.
StationaryTarget 32s
Stationary alignment target:
0 – None
1 – Disk
2 – Bar
3 – Plate
StationaryTarget.options 32s (CSV) List of available stationary alignment targets.
MovingTarget 32s
Moving alignment target:
0 – None
1 – Disk
2 – Bar
3 – Plate
MovingTarget.options 32s (CSV) List of available moving alignment targets.
EncoderCalibrateEnabled Bool Enables encoder resolution calibration.
Disk Section
See Disk below.
Bar Section
See Bar below.
Plate Section
See Plate on the next page.
Alignment Child Elements
Disk
Element Type Description
Diameter 64f Disk diameter (mm).
Height 64f Disk height (mm).
Disk Child Elements
Bar
Element Type Description
Width 64f Bar width (mm).
Bar Child Elements