Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 70
System Management and Maintenance
The following sections describe how to set up the sensor connections and networking, how to calibrate
encoders and choose alignment reference, and how to perform maintenance tasks.
Manage Page Overview
Gocator's system and maintenance tasks are performed on the Manage page.
Element Description
1 Sensor System Contains settings for configuring sensor system and layout, and
boot-up. See Sensor System on the next page.
2 Networking Contains settings for configuring the network. See Networking on
page 75.
3 Motion and Alignment Contains settings to configure the encoder. See Motion and
Alignment on page 75.
4 Jobs Lets you manage jobs stored on the sensor. See Jobs on page 77.
5 Security Lets you change passwords. See Security on page 79.
6 Maintenance Lets you upgrade firmware, create/restore backups, and reset
sensors. See Maintenance on page 80.
7 Support Lets you open an HTMLversion or download a PDFversion of the
manual, download the SDK, or save a support file.Also provides
device information. See Support on page 83
To Next Page
Loading...
