LMI Technologies Gocator Series - Ellipse

Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 214
Measurement Illustration
Plane Distance
Determines the distance between the selected features.
The position of the lowest feature point is projected onto
the XY plane of the highest feature point.
Center X
Determines the X position of the center point between the
selected features.
Center Y
Determines the Y position of the center point between the
selected features.
Center Z
Determines the Z position of the center point between the
selected features.
Parameter Description
Feature 1
Feature 2
One of the following:
l
Average (the mean X, Y, and Z of the data points)
l
Median (median X, Y, and Z of the data points)
l
Centroid (the centroid of the data considered as a
volume with respect to the z = 0 plane)
l
Min X
l
Max X
l
Min Y
l
Max Y
l
Min Z
l
Max Z
Decision See Decisions on page 159.
Region See Regions on page 158.
Output See Filters on page 161.
Parameters
Ellipse
The Ellipse tool provides measurements for the major and minor axis lengths of an ellipse fitted to the
part's shape in the XY plane, and also for the ratio of the major and minor axis lengths and for the