Gocator Line Profile Sensors: User Manual
Gocator Emulator • 269
Element Description
Set as Default
button
Setting a different job as the default is not persistent in the emulator. The job set as default when the
support file (used to create a virtual sensor)was downloaded is used as the default whenever the
emulator is started.
Download...
button
Downloads the selected job to the client computer.
Upload...
button
Uploads a job from the client computer.
Unsaved jobs are indicated by "[unsaved]".
Changes to job files in the emulator are not persistent (they are lost when you close or restart
the emulator). However, you can keep modified jobs by first saving them and then downloading
them to a client computer.
To save a job:
1. Go to the Manage page and click on the Jobs category.
2. Provide a name in the Name field.
To save an existing job under a different name, click on it in the Jobs list and then modify it in the Name
field.
3. Click on the Save button or press Enter.
To download, load, or delete a job, or to set one as a default, or clear a default:
1. Go to the Manage page and click on the Jobs category.
2. Select a job in the Jobs list.
3. Click on the appropriate button for the operation.
Scan, Model, and Measurement Settings
The settings on the Scan page related to actual scanning will clear the buffer of any scan data that is
uploaded from a client computer, or is part of a support file used to create a virtual sensor. If Replay
Protection is checked, the emulator will indicate in the log that the setting can't be changed because the
change would clear the buffer. For more information on Replay Protection, see Using Replay Protection
on page 263.
Other settings on the Scan page related to the post-processing of data can be modified to test their
influence on scan data, without modifying or clearing the data, for example edge filtering (page 120), and
filters on the X axis (page 110). Note that modifying the Y filters causes the buffer to be cleared.
To Next Page
Loading...
