LMI Technologies Gocator Series - Dimension

Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 177
Measurement Illustration
Radius
Measures the radius of the circle.
X
Finds the circle center position in the X axis.
Z
Finds the circle center position in the Z axis.
Measurements
Parameter Description
Decision See Decisions on page 159.
Region See Regions on page 158.
Filters See Filters on page 161.
Parameters
Dimension
The Dimension tool provides Width, Height, Distance, Center X, and Center Zmeasurements.
The Dimension tool can be used whether Uniform Spacing is enabled or not, that is, with either
resampled or unresampleddata. For more information on the Uniform Spacing setting and
resampled data, see Uniform Spacing (Data Resampling) on page 53.
See Adding and Configuring a Tool on page 156 for instructions on how to add measurement tools.