Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 67
Open the log for details on the warning. For more information on logs, see Log below.
When a sensor is accelerated a "rocket"icon appears in the metrics area.
Data Viewer
The data viewer is displayed in both the Scan and the Measure pages, but displays different
information depending on which page is active.
When the Scan page is active, the data viewer displays sensor data and can be used to adjust the active
area and other settings. Depending on the selected operation mode (page 87), the data viewer can
display video images, profiles, sections, or surfaces. For details, see Data Viewer on page 121.
When the Measure page is active, the data viewer displays sensor data onto which representations of
measurement tools and their measurements are superimposed. For details, see Data Viewer on page
156.
Because Gocator 2880 has two cameras, two profiles are displayed in the Gocator web
interface.
Status Bar
The status bar lets you do the following:
l
See sensor messages in the log.
l
See frame information.
l
Change the interface language.
Log
The log, located at the bottom of the web interface, is a centralized location for all messages that the
Gocator displays, including warnings and errors.
A number indicates the number of unread messages:
To Next Page
Loading...
