LMI Technologies Gocator Series - Panel

Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 186
Measurement Illustration
StdDev
Finds the best-fitted line and measures the standard
deviation of the laser points from the line.
Min Error
Finds the best-fitted line and measures the minimum error
from the line (the maximum distance below the line).
Max Error
Finds the best-fitted line and measures the maximum error
from the line (the maximum distance above the line).
Percentile
Finds the best-fitted line and measures the range (in Z)
that covers a percentage of points around the line.
Measurements
Parameter Description
Percent
(Percentile measurement only)
The specified percentage of points around the best-fitted
line.
Decision See Decisions on page 159.
Region See Regions on page 158.
Filters See Filters on page 161.
Parameters
Panel
The Panel tool provides Gap and Flush measurements. Gocator compares the measurement value with
the values in Min and Max to yield a decision. For more information on decisions, see Decisions on page
159.
See Adding and Configuring a Tool on page 156 for instructions on how to add measurement tools.